Description
Microphone Desk Stand with Dante Network Output (TDN1-F) with Gooseneck Microphone (GS-380)
TDN1-F desk stand allows Dante technology to be used with any phantom-powered condenser gooseneck microphone with a 3-pin XLRF-type output. The desk stand is designed for surface-mount applications such as high-qualitysound reinforcement, conferencing, distance learning and other demanding sound pickup applications. It can be used with the other brands gooseneck microphone.
TDN1-F's Parameters
- Frequency Response: 20 - 20,000 Hz
- Low Frequency Rolloff: 150Hz, 18 dB/octave
- Gain Adjustment: six level of adjustable gain
- Input Impedance: 2.2 kΩ
- Maximum Sound Input Level：0dBu @ +20 dB gain
- Signal-to-Noise Ratio: 65dB, 1kHz at 1 Pa
- Power Requirements: PoE IEEE802.3af standard (Power consumption 1.5W)
- Power Consumption: 2.3W
- Phantom Power: 48V DC
- Weight: 720g
- Dimensions (mm): 170 (L) × 120.3 (W) ×48.5 (H)
- Output interface: standard Ethernet interface
- Input Connector: 3-pin XLRF-type
- Output Connector: RJ45
- Cable quality: Shielded CAT5 or CAT6 recommended
- Transmission speed: 100 Mbps
Gooseneck Microphone (GS-380)
GS-380's Parameters
- Microphone Type: Condenser Cardioid
- Frequency Response: 35Hz - 18kHz
- High pass filter: 100Hz, 18dB/octave
- Turn-on sensitivity: -32dB at 1V at 1Pa
- Output Impedance: 250 Ω
- Maximum withstand sound pressure: 130dB sound pressure, 1KHz at 1% T.H.D.
- Dynamic Range (Typical): 110dB, 1KHz at maximum sound pressure
- Signal-to-noise ratio: >68dB, 1KHz at 1Pa
- Switches: Flat, High Pass Filter
- Phantom Power: DC12 - 52V
- Power consumption: 5mA (typical)
- Output connector: built-in 3-pin XLR male
- The best distance for pickup: 10 - 20cm
- Microphone size and weight:
GS-530 530mm about 190g
GS-450 450mm about 170g
GS-380 380mm about 150g - Color: Black
