NRS8P
unmanaged PoE+ switch 8x 1G RJ45 + 2x 1G RJ45 (uplink), 96W
Catalogue index: Niv000001
- Delivery time: 14 days
Description
Niveo Professional NRS8P - unmanaged PoE+ switch, 8 Gigabit Ethernet PoE+ ports and 2 Gigabit uplink ports
Niveo Professional NRS8P is an unmanaged PoE+ switch with 8 RJ45 10/100/1000Mbps ports with PoE+ power and 2 RJ45 10/100/1000Mbps uplink ports. The PoE+ ports comply with IEEE 802.3af/at standards and deliver up to 30W per port, while the maximum PoE power of the entire device is 120W. It powers teleconferencing systems, surveillance, wireless access points, and other network devices. The switch automatically detects PoE devices and supplies power to them without damaging non-PoE devices. PoE priority is enabled by default and decreases from port 1 to port 8.
All ports support IEEE 802.3x flow control in full duplex mode and Backpressure in half duplex mode, as well as Auto MDI/MDIX, automatic speed selection of 10/100/1000M, and full line speed switching. The efficient Ethernet chip and high bandwidth of the motherboard ensure fast data processing. The metal housing is electrostatically painted and the bidirectional heat dissipation guarantees durability. The DIP switch allows you to select the operating mode with one move: VLAN port isolation, default mode, or Extend mode with a range of up to 250m. This is a simple solution for smaller AV, conferencing, and surveillance installations that starts up without configuration.
Functionality
- PoE+ power IEEE 802.3af (15.4W) and IEEE 802.3at (30W) on 8 RJ45 ports
- maximum PoE power of the entire device: 120W
- automatic detection of PoE devices - safe operation with non-PoE devices
- PoE priority from port 1 to port 8 - enabled by default
- output voltage on PoE port: 44-57V DC
- PoE power pins: 1/2+, 3/6-
- DIP switch with three modes: VLAN, Default, Extend
- VLAN mode: PoE ports 1-8 are isolated from each other and communicate only with uplink ports
- Default mode: communication between all ports, range up to 100m, automatic speed selection 10/100/1000M
- Extend mode: ports 7-8 operate at a forced speed of 10M, transmission range up to 250m
- IEEE 802.3x flow control (full duplex) and Backpressure (half duplex)
- Auto MDI/MDIX and automatic speed selection 10/100/1000M
- full line speed switching in Store-and-Forward mode
Features
- 8 RJ45 10/100/1000Mbps ports with PoE+
- 2 RJ45 10/100/1000Mbps uplink ports
- throughput: 20Gbps
- packet forwarding rate: 14.88Mpps
- cache memory: 448Kbit
- MAC address table: 2K
- standards: IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.3af, 802.3at
- media: 10Base-T - Cat3, 4, 5 or higher UTP cable (up to 100m); 100Base-TX and 1000Base-TX - Cat5 or higher UTP cable (up to 100m)
- power supply: AC input 100-240V, 50/60Hz
- PoE power: 52V/1.85A (96W) or 52V/2.3A (120W) - depending on the version
- metal housing electrostatically painted
- bidirectional heat dissipation
- LED indicators: PWR, Link/Data (green) for ports 1-10
- dimensions: 200 x 118 x 44mm
- net weight: 0.69kg (96W version) / 0.71kg (120W version)
- gross weight: 0.97kg (96W version) / 0.99kg (120W version)
- packaging dimensions: 245 x 190 x 60mm
- operating temperature: -10-50°C
- storage temperature: -40-70°C
- operating humidity: 10-90% RH (non-condensing)
- storage humidity: 5-95% RH (non-condensing)
- included: switch, power cable, user manual
Niveo Professional NRS8P is a compact and durable PoE+ switch for smaller AV installations, conferencing systems, and surveillance. It combines 8 Gigabit PoE+ ports and 2 Gigabit uplink ports with simple operation via the DIP switch, which enables port isolation or Extend mode with a range of up to 250m.
