NPI-HX1

Niveo Professional NPI-HX1 - single-port gigabit PoE++ 95W power injector IEEE 802.3bt

The Niveo Professional NPI-HX1 is a single-port gigabit PoE injector with a power output of 95W. It delivers power over all four pairs of wires in an Ethernet cable. It is fully compliant with IEEE 802.3af/at/bt standards and transmits power and data over a single cable up to 100m. The injector automatically detects and recognizes powered devices (PD) compliant with IEEE 802.3af/at/bt and adjusts the output power accordingly. The mode switch allows powering devices that are not compliant with IEEE standards (Legacy BT). In UPoE mode, the injector delivers maximum power regardless of the device class. Non-PoE devices can be powered through an additional PoE splitter. Built-in surge protection, a grounding terminal, and status LEDs facilitate safe installation and monitoring. The device can be placed on a desk or mounted on a wall.

Functionality

• PoE output power up to 95W, output voltage 54V DC
• Compliance with IEEE 802.3af/at/bt
• Power delivery over four pairs: data pairs 1/2(-), 3/6(+), spare pairs 4/5(+), 7/8(-)
• Data input port 10/100/1000Mb/s RJ45
• PoE output port 10/100/1000Mb/s RJ45
• Data and power transmission range up to 100m
• Automatic detection of PD devices and adjustment of output power
• Mode switch: BT, Legacy BT, and UPoE
• LED indicators: PWR (power), PoE (PD device power status), PoE MAX (load above 80%)
• Built-in surge protection
• Grounding terminal on the rear panel
• Power supply 100-240V AC, 50/60Hz, max. 1.8A, AC socket on the rear panel
• Desk or wall mounting

Features

• Powering demanding PoE++ devices with a single cable, without additional power wires
• Easy network expansion without replacing the switch with a PoE model
• Compatibility with devices not compliant with IEEE standards
• Full Gigabit Ethernet throughput without data transmission limitations
• Safe operation due to automatic device recognition
• Quick power and load status check via LED indicators
• Flexible desk or wall mounting
• Included: injector, power cable, 4 feet, manual
• Dimensions: 170mm x 100mm x 40mm
• Operating temperature: 0°C to 40°C
• Storage temperature: -40°C to 70°C
• Operating humidity: 10-90% non-condensing
• Storage humidity: 5-90% non-condensing

Niveo Professional NPI-HX1 is a gigabit PoE++ injector with a power output of 95W, compliant with IEEE 802.3af/at/bt, with power delivery over four pairs and modes BT, Legacy BT, and UPoE. It allows for quick powering of PTZ cameras, access points, touch panels, displays, and other high-power devices without replacing the existing network switch.